{"title":"Exhaust Parts","description":"\u003cp\u003eHigh-flow stainless exhaust manifolds and pipes for diesel and gas trucks — Ford, Ram, GMC, and Cat.\u003c\/p\u003e\n\u003ch2\u003eManifolds Built to Take the Heat Without Cracking\u003c\/h2\u003e\n\u003cp\u003eFactory exhaust manifolds are thin, single-piece cast castings built for cost, not longevity. Under the heat cycles of towing and daily driving they crack at the divider walls, warp at the flanges, and leak — which kills turbo efficiency, raises EGTs, and saps power. These high-flow stainless and HSM manifolds use stronger alloys and expansion joints to move with the heat instead of fracturing, and many open up the runners for less backpressure.\u003c\/p\u003e\n\u003cp\u003eIt's the same story on the gas trucks: the 3.5L EcoBoost only uses 8 of the cylinder head's 11 stud locations and warps and snaps studs, and the 5.7L HEMI's manifold bolts break and leak (the classic \"HEMI tick\"). The kits here address those at the source too.\u003c\/p\u003e\n\u003ch3\u003eFits these trucks\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFord 7.3L, 6.0L, 6.4L \u0026amp; 6.7L Powerstroke — manifolds, kits, turbo \u0026amp; tail pipes\u003c\/li\u003e\n  \u003cli\u003eFord F-150 \u0026amp; Lincoln Navigator 3.5L EcoBoost (gas) — manifold kits\u003c\/li\u003e\n  \u003cli\u003eRam 1500 \/ Durango \/ Jeep 5.7L HEMI (gas) — manifold kits\u003c\/li\u003e\n  \u003cli\u003eDodge\/Ram 5.9L \u0026amp; 6.7L Cummins — manifolds incl. T3\/T4\/T6 turbo-swap\u003c\/li\u003e\n  \u003cli\u003eGMC\/Chevy 6.6L Duramax (LB7–L5P) — manifolds \u0026amp; turbo exhaust pipes\u003c\/li\u003e\n  \u003cli\u003eCaterpillar C15 \/ C16 \/ 3406E — high-flow manifolds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do factory exhaust manifolds crack and leak?\u003c\/strong\u003e\u003cbr\u003eThin cast-iron manifolds expand and contract through every heat cycle. Towing and daily heat fatigue them until they crack at the divider walls and warp at the flanges, opening an exhaust leak that drops boost, raises EGTs, and ticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a high-flow stainless manifold get me?\u003c\/strong\u003e\u003cbr\u003eStronger 304\/HSM construction and expansion joints that move with the heat instead of cracking, plus larger runners for less backpressure and lower EGTs. A fix and an upgrade in one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you cover gas trucks too?\u003c\/strong\u003e\u003cbr\u003eYes. We carry manifold kits for the 3.5L EcoBoost (F-150, Navigator) and 5.7L HEMI (Ram 1500, Durango, Jeep) — both known for warped manifolds, broken studs, and the tick. PPF isn't diesel-only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my truck?\u003c\/strong\u003e\u003cbr\u003eMatch the year and engine on the product page to your truck. Each manifold is built for a specific platform — see the fitment list above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a bolt-on?\u003c\/strong\u003e\u003cbr\u003eManifolds bolt on in place of the factory casting; some kits include up-pipes, gaskets, and hardware. Check each product for what's included. Get the right part the first time.\u003c\/p\u003e","products":[{"product_id":"high-flow-t3-exhaust-manifold-kit-for-dodge-ram-25003500-59l-cummins","title":"High Flow T3 Exhaust Manifold Kit for Dodge Ram 2500\/3500 5.9L Cummins","description":"\u003cp\u003eThis High Flow T3 Exhaust Manifold outflows the factory exhaust manifold by up to 25%, delivering measurable performance gains for 2003–2007 Dodge Ram 2500\/3500 trucks with the 5.9L Cummins common rail diesel. The thick wall (0.25″ vs. 0.15″) T3 flange design increases strength, eliminating warping and cracking common to factory manifolds. Designed as a direct replacement, this T3 exhaust manifold combines port-matched runner geometry with durable ductile iron construction to reduce exhaust backpressure and support turbo response in towing and performance applications.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2003 Dodge Ram 2500 — 5.9L Cummins Diesel Common Rail (T3 turbo flange)\u003c\/li\u003e\n  \u003cli\u003e2004 Dodge Ram 2500 — 5.9L Cummins Diesel Common Rail (T3 turbo flange)\u003c\/li\u003e\n  \u003cli\u003e2005 Dodge Ram 2500 — 5.9L Cummins Diesel Common Rail (T3 turbo flange)\u003c\/li\u003e\n  \u003cli\u003e2006 Dodge Ram 2500 — 5.9L Cummins Diesel Common Rail (T3 turbo flange)\u003c\/li\u003e\n  \u003cli\u003e2007 Dodge Ram 2500 — 5.9L Cummins Diesel Common Rail (T3 turbo flange)\u003c\/li\u003e\n  \u003cli\u003e2003 Dodge Ram 3500 — 5.9L Cummins Diesel Common Rail (T3 turbo flange)\u003c\/li\u003e\n  \u003cli\u003e2004 Dodge Ram 3500 — 5.9L Cummins Diesel Common Rail (T3 turbo flange)\u003c\/li\u003e\n  \u003cli\u003e2005 Dodge Ram 3500 — 5.9L Cummins Diesel Common Rail (T3 turbo flange)\u003c\/li\u003e\n  \u003cli\u003e2006 Dodge Ram 3500 — 5.9L Cummins Diesel Common Rail (T3 turbo flange)\u003c\/li\u003e\n  \u003cli\u003e2007 Dodge Ram 3500 — 5.9L Cummins Diesel Common Rail (T3 turbo flange)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast ductile iron with reinforcing rib for maximum strength and heat resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eT3 Flange Thickness:\u003c\/strong\u003e 0.25″ (versus 0.15″ factory stock) for superior durability and crack resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Performance:\u003c\/strong\u003e Outflows factory exhaust manifold by 23%, improving performance and throttle response\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePort Design:\u003c\/strong\u003e Matched ports and merged runner geometry reduce exhaust backpressure and maximize exhaust flow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAuxiliary Ports:\u003c\/strong\u003e Two pre-tapped Exhaust Gas Temperature (EGT) probe ports for easy installation of gauges or pyrometer equipment\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTurbo Compatibility:\u003c\/strong\u003e Direct fit for factory Holset turbo systems; compatible with towing, hauling, and daily driving\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Designed to replace factory manifolds that warp and crack under repeated thermal cycling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is a direct bolt-on replacement that connects to factory engine mounting points. Use fresh exhaust manifold gaskets and high-quality mounting studs and nuts with every installation. Torque fasteners in a staged pattern on a cold engine to prevent warping or gasket failure.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52899394355509,"sku":"DR-501-0307","price":289.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-501-0307-1.webp?v=1779734768"},{"product_id":"t4-2nd-gen-swap-exhaust-manifold-dodge-ram-2500-3500-5-9l-6-7l-cummins-diesel-1998-2019","title":"T4 2nd Gen Swap Exhaust Manifold for Dodge Ram 2500\/3500 5.9L 6.7L Cummins Diesel","description":"\u003cp\u003eThis T4 2nd gen swap exhaust manifold fits 1998-2002 Dodge Ram 2500 and 3500 trucks with 5.9L Cummins 24V and will fit 2003-2019 models with 5.9L and 6.7L Cummins when used in a 2nd gen swap configuration. Cast stainless steel and CNC machined with chamfered edges, the manifold features a 3\/4 inch thick center section engineered to support high-flow turbo routing for performance builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1998–2002 Dodge Ram 2500\/3500 — 5.9L Cummins 24V\u003c\/li\u003e\n  \u003cli\u003e2003–2019 Dodge Ram 2500\/3500 — 5.9L and 6.7L Cummins (2nd Gen swap configuration)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Cast stainless steel, CNC machined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Section Thickness:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRunner Size:\u003c\/strong\u003e 1.650 inches all the way to the center outlet for high flow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Flange:\u003c\/strong\u003e T4 divided metal turbo flange with 0.550 inch thickness machined on both sides for even clamping pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTurbo Compatibility:\u003c\/strong\u003e Designed exclusively for aftermarket T4-flange turbochargers such as S300 (T4 config), S400, and other large-frame turbos\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e 2 ports drilled and tapped for probes; stainless steel studs and serrated nuts; T4 divided metal turbo gasket; multi-layer exhaust manifold gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is recommended for this T4 2nd gen swap exhaust manifold. Verify engine setup, turbo flange compatibility, and surrounding clearance before ordering, as additional piping, hardware, or tuning may be required depending on your specific build.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52899402350901,"sku":"DR-341-9819","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-341-9819_-_1_png.webp?v=1779735493"},{"product_id":"high-flow-exhaust-manifold-ram-2500-3500-6-7l-cummins-diesel-24v-2007-5-2018","title":"High Flow Exhaust Manifold for Ram 2500\/3500 6.7L Cummins Diesel 24V (2007.5-2018)","description":"\u003cp\u003eThis high flow exhaust manifold is a direct OEM replacement for the factory exhaust manifold on 2007.5–2018 Dodge Ram 2500 and 3500 trucks with the 6.7L Cummins engine. It delivers significant exhaust flow improvements—test results showed a 72% increase in exhaust flow over the factory manifold—while solving the cracking, warping, and shrinkage problems that plague the OEM design. Built from high-silicon ductile iron with a fully divided pulse manifold design, it eliminates the failures that compromise factory performance.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2007.5–2009 Dodge Ram 2500\/3500 6.7L Cummins 24V\u003c\/li\u003e\n  \u003cli\u003e2010–2012 Dodge Ram 2500\/3500 6.7L Cummins 24V\u003c\/li\u003e\n  \u003cli\u003e2013–2018 Dodge Ram 2500\/3500 6.7L Cummins 24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-silicon ductile iron construction designed to withstand extreme temperatures and vibration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Fully divided pulse manifold with precision slip joints that allow the manifold to expand and contract, reducing cyclic thermal fatigue and increasing longevity.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTurbo Flange:\u003c\/strong\u003e Factory T4i flange that bolts directly to stock HE351VE or HE300VG turbocharger with no modifications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e Reduces exhaust gas temperatures (especially on the rear cylinders), improves turbo spool-up, and enhances throttle response.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEGR Compatibility:\u003c\/strong\u003e Retains factory-style HE351VE turbo flange and EGR connections for full emissions compliance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor Ports:\u003c\/strong\u003e Equipped with dual 1\/8\" NPT exhaust gas ports supplied for gauges or testing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGaskets Included:\u003c\/strong\u003e Includes 6-port gaskets to ensure leak-free seal.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Does NOT fit 2013–2018 Cab \u0026amp; Chassis models (Ram 3500\/4500\/5500 Cab \u0026amp; Chassis). These trucks use a different manifold-to-exhaust routing and turbo position that is not compatible with this manifold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis high flow exhaust manifold is a bolt-on replacement that requires removal of the factory manifold and mounting to your existing turbocharger. Professional installation is recommended to ensure proper torque, gasket sealing, and alignment.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52899402776885,"sku":"DR-563-7518","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-563-7518_1.webp?v=1779735967"},{"product_id":"t4-stainless-steel-exhaust-manifold-cummins-6b-5-9l-12v-diesel","title":"T4 Stainless Steel Exhaust Manifold for Cummins 6B 5.9L 12V","description":"\u003cp\u003eThis T4 stainless steel exhaust manifold is designed for 5.9L 12 valve Cummins engines (1989–1998) and features a T4 turbo mounting flange, making it ideal for S300 and S400 frame turbochargers, compound turbo setups, and high-horsepower single turbo builds. The optimized runner design improves exhaust gas flow to the turbocharger, helping reduce drive pressure, support higher boost levels, and improve overall turbo efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1989–1998 Dodge Ram 5.9L 12V Cummins -- 6B (rectangular port configuration)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel construction for heat and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTurbo Flange:\u003c\/strong\u003e T4 configuration for aftermarket turbocharger compatibility\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Turbos:\u003c\/strong\u003e S300, S400, and other T4 frame turbos; supports compound and high-boost single turbo applications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Runner configuration optimized for exhaust gas flow and reduced back pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePorts:\u003c\/strong\u003e Rectangular port configuration for direct fitment to Cummins 6B engines\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGaskets and Hardware:\u003c\/strong\u003e Refer to product photos for included components; verify mounting position and turbo flange requirements before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is a bolt-on replacement that requires removal of the factory exhaust manifold and transfer of gaskets and hardware. Professional installation is recommended to ensure proper fitment and leak-free seal.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52899403006261,"sku":"DR-341-F-8998","price":399.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-341-F-8998_-_1.webp?v=1779773815"},{"product_id":"t6-2nd-gen-swap-exhaust-manifold-ram-2500-3500-5-9l-6-7l-cummins-diesel-1998-2019","title":"T6 2nd Gen Swap Exhaust Manifold for Ram 2500\/3500 5.9L 6.7L Cummins Diesel","description":"\u003cp\u003eThis T6 2nd Gen swap exhaust manifold for Ram 2500 and 3500 models features 1.650 inch inside runner sizing all the way to the center outlet for high flow, delivering direct fitment for 1998–2002 models and 2nd Gen swap configuration compatibility for 2003+ Ram 2500\/3500 with 5.9L and 6.7L Cummins. Cast from 304 stainless steel with reinforcing ribs and thick-wall construction, this manifold supports large-frame turbo platforms like S400 and S500 class units with its T6 flange mount.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1998–2002 Ram 2500 \/ 3500 — 5.9L Cummins 24-Valve (Direct Fit)\u003c\/li\u003e\n  \u003cli\u003e2003–2019 Ram 2500 \/ 3500 — 5.9L \/ 6.7L Cummins (2nd Gen Swap Configuration)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel casting with thick-wall construction and reinforcing ribs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTurbo Flange:\u003c\/strong\u003e T6 mount for S400, S500 class large-frame turbos\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterior Runner Diameter:\u003c\/strong\u003e 1.650\" full-length for maximum exhaust velocity\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Section Thickness:\u003c\/strong\u003e 3\/4\" thick wall design for heat retention and custom porting capability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 36 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-tapped Ports:\u003c\/strong\u003e EGT and drive pressure sensor ports\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Manifold gaskets and turbo mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eManifold bolts directly to the cylinder head using existing bolt holes. T6 turbo flange requires compatible turbocharger; professional installation recommended for custom fabrication and turbo integration.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915650199861,"sku":"DR-341-T6-9819","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-341-T6-9819_-_1.webp?v=1779774530"},{"product_id":"304-ss-upgraded-exhaust-manifold-for-2003-2007-dodge-ram-5-9-cummins-diesel","title":"304 SS Upgraded Exhaust Manifold For 2003-2007 Dodge Ram 5.9 Cummins Diesel","description":"\u003cp\u003eThis 304 stainless steel upgraded exhaust manifold fits 2003–2007 Dodge Ram 5.9L Cummins and features a T3 flange, thick-wall design, and two EGT probe ports. The 304 stainless steel construction resists corrosion and withstands demanding diesel operating conditions while supporting improved exhaust flow and turbo response compared to factory restrictive castings.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2003 Dodge Ram 5.9L Cummins Diesel\u003c\/li\u003e\n  \u003cli\u003e2004 Dodge Ram 5.9L Cummins Diesel\u003c\/li\u003e\n  \u003cli\u003e2005 Dodge Ram 5.9L Cummins Diesel\u003c\/li\u003e\n  \u003cli\u003e2006 Dodge Ram 5.9L Cummins Diesel\u003c\/li\u003e\n  \u003cli\u003e2007 Dodge Ram 5.9L Cummins Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast 304 stainless steel with thick wall design for maximum durability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTurbo Flange:\u003c\/strong\u003e T3 flange, direct fit to factory turbo mounting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePorts:\u003c\/strong\u003e Two EGT probe ports for temperature monitoring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e Thick wall (0.25″ vs. 0.15″) T3 flange design increases strength, eliminating warping and cracking common to factory exhaust manifolds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Benefits:\u003c\/strong\u003e Matched ports and merged runner design reduce exhaust backpressure and maximize exhaust flow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Exhaust manifold gaskets, turbo flange gasket, and port plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis manifold is a direct replacement for the factory exhaust manifold. Installation requires removal of the turbocharger, manifold studs, and gaskets. Proper bolt sequencing and high-temperature anti-seize lubricant are recommended for a sealed, reliable fit across thermal cycles.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915741786421,"sku":"DR-144-0307","price":379.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-144-0307-2_png.webp?v=1779817245"},{"product_id":"polished-ss304-5-exhaust-tail-pipe-for-13-18-6-7l-dodge-cummins","title":"Polished SS304 5\" Exhaust Tail Pipe For 13-18 6.7L Dodge Cummins","description":"\u003cp\u003eThis Polished SS304 5\" Exhaust Tail Pipe is designed for the 2013–2018 Dodge 6.7L Cummins. 304 stainless steel does not rust or corrode and is one of the most corrosion resistant alloys readily available. A 5\" diameter offers a deeper note and potential EGT benefits at load, providing a direct-fit replacement for worn factory tail pipes or integration into complete exhaust builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2013–2018 Dodge Ram 2500\/3500 with 6.7L Cummins diesel engine — crew cab short bed, crew cab long bed, and mega cab configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel offers slightly better corrosion protection due to its nickel content\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5 inches — ideal for the 6.7L Cummins, balancing flow velocity with volume for power gains and an authoritative diesel tone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished mirror-like surface for premium rear-end appearance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 304 stainless systems withstand long-term exposure to salt spray and Canadian winter conditions without rust or corrosion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Replacement tail pipe for factory exhaust or performance-focused builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation is a direct bolt-on replacement using OEM mounting points with no cutting or welding required. Basic hand tools and jack stands are sufficient for installation on most setups.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915759874357,"sku":"DR-214-1318","price":253.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-214-1318_-_1.webp?v=1779776821"},{"product_id":"stainless-high-flow-exhaust-manifold-for-1998-2002-pre-egr-cummins-0199x-3880199","title":"Stainless HIGH FLOW Exhaust Manifold For 1998-2002 Pre EGR Cummins 0199X 3880199","description":"\u003cp\u003eThis stainless high-flow exhaust manifold is designed for pre-EGR engines 1998-2002 and replaces OEM part numbers 0199X and 3880199. The manifold is designed to flow 20% better than stock and is ceramic coated inside and out, reducing heat and improving air velocity. Ceramic coating lowers manifold temperatures 300°F and decreases EGT's 80-100°F. The stainless construction resists corrosion and thermal stress, making it dependable for cracked, leaking, or restrictive factory manifolds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1998–2002 Dodge Ram 2500\/3500 — 5.9L Cummins 24-valve (Pre-EGR)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless construction with ceramic coating inside and out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Improvement:\u003c\/strong\u003e Designs to flow 20% better than stock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAir Flow Gain:\u003c\/strong\u003e Minimum of 20 cubic feet of additional air flow per minute per port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManifold Temperature Reduction:\u003c\/strong\u003e 300°F lower manifold temps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEGT Reduction:\u003c\/strong\u003e 80-100°F lower EGT's\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFuel Economy:\u003c\/strong\u003e Increase fuel mileage .2 -.3 mpg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorsepower Increase:\u003c\/strong\u003e 28 to 32 horsepower increase\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJoint Design:\u003c\/strong\u003e Joints designed with tighter tolerances and 50% more surface contact to ensure no leaks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTurbo Compatibility:\u003c\/strong\u003e Allows you to put any turbo with a T6 flange on your engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Kit Included:\u003c\/strong\u003e Comes with a full installation kit which includes studs, (2) spacers, gaskets, oil lines, and adapters\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Replacement:\u003c\/strong\u003e Direct replacement for part numbers 0199X and 3880199\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe manifold comes with a full installation kit which includes studs, (2) spacers, gaskets, oil lines, and adapters to install the new turbo and manifold onto your truck. Professional installation is recommended to ensure proper torque sequencing and gasket sealing.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915764691253,"sku":"DR-246-9802","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-246-9802_-_1.webp?v=1780004080"},{"product_id":"stainless-steel-high-flow-exhaust-manifold-for-cat-c15-c16-3406e-146-9445","title":"Stainless Steel HIGH FLOW Exhaust Manifold for CAT C15 C16 3406E 146-9445","description":"\u003cp\u003eThe Stainless Steel High Flow Exhaust Manifold for CAT C15, C16, and 3406E engines replaces OEM part number 146-9445 and is designed for commercial diesel trucks, heavy-duty equipment, and high-mileage engine applications. Built from stainless steel for excellent durability and heat resistance, this high flow exhaust manifold provides 20% increase in airflow over stock to help improve exhaust flow, reduce restriction, and support turbo efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1994–2004 Caterpillar 3406E — 14.6L displacement\u003c\/li\u003e\n  \u003cli\u003e1999–2004 Caterpillar C15 — 14.6L displacement\u003c\/li\u003e\n  \u003cli\u003e1999–2002 Caterpillar C16 — 15.8L displacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel construction for rust and heat resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Single turbo, T6 turbocharger flange\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAirflow Improvement:\u003c\/strong\u003e 20% increase in airflow over stock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEGT Reduction:\u003c\/strong\u003e 75–100 degree cooling of exhaust gas temperatures\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 39 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 44″ W × 10″ H × 8″ L\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTurbo Mount:\u003c\/strong\u003e Ball and socket slip joints for excellent sealing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Three-piece design with dual end sections and center section\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e One-year coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eDirect fit for OEM mounting locations on single-turbo Peterbilt and Kenworth trucks equipped with CAT 3406E, C15, and C16 engines. Tighten manifold bolts in a crisscross pattern to Caterpillar-specified torque, checking all hardware after initial heat cycles. Professional installation is recommended to ensure proper sealing and gasket compression.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915764756789,"sku":"CT-245-9304","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/CT-245-9304-1.webp?v=1780004544"},{"product_id":"1-piece-style-cat-c15-single-turbo-exhaust-manifold-for-caterpillar-diesel","title":"1-piece-style Cat C15 Single Turbo Exhaust Manifold for Caterpillar Diesel","description":"\u003cp\u003eThe 1-piece-style Cat C15 Single Turbo Exhaust Manifold is engineered for Caterpillar C15 diesel engines with a single turbo configuration. As a 1-piece manifold design it will never leak and is easy on studs and gaskets. Designed for heavy-duty diesel performance, this manifold restores reliable exhaust sealing, improves exhaust flow consistency, and supports dependable turbocharger operation across commercial trucks, heavy-duty equipment, and high-mileage applications.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCaterpillar C15 diesel engines -- single turbo configuration\u003c\/li\u003e\n  \u003cli\u003eSuitable for C15-equipped commercial trucks and heavy-duty equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece construction eliminates leak points and reduces stress on mounting studs and gaskets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron or ductile iron construction engineered to withstand extreme exhaust temperatures exceeding 1,200°F during normal operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Direct replacement for cracked, leaking, or worn factory exhaust manifolds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Restores proper exhaust backpressure and turbocharger efficiency on high-mileage C15 engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation of the exhaust manifold requires proper gasket sealing and secure fastening to the engine block and turbocharger mounting surface. Professional installation is recommended to ensure precise torque specifications and elimination of exhaust leaks.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915764855093,"sku":"CT-245-1-4510","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/CT-245-1-4510-1.webp?v=1780005210"},{"product_id":"stainless-steel-high-flow-exhaust-manifold-compatible-with-2004-5-2010-cat-c13-d","title":"Stainless Steel High Flow Exhaust Manifold Compatible with 2004.5-2010 CAT C13 D","description":"\u003cp\u003eThis stainless steel high-flow exhaust manifold for 2004.5–2010 Caterpillar C13 diesel engines reduces exhaust restriction and supports improved turbo efficiency. The design is pressure fitted to eliminate leaks, with sharp corners smoothed for better flow. Weight is 29.0 lbs.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2004.5–2010 Caterpillar C13 D\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-grade stainless steel construction resists heat and corrosion better than cast iron alternatives\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e High-flow manifold with smoothed interior passages and optimized port geometry to maximize exhaust velocity to the turbocharger\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 29.0 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Performance:\u003c\/strong\u003e Pressure fitted construction with smooth, optimized corners reduces turbo lag and improves exhaust flow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Compatibility:\u003c\/strong\u003e Direct replacement for OEM manifold 250-4409 on C13 Acert engines\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis manifold is a direct bolt-on replacement. Installation typically requires turbo clamp, spacers, studs, nuts, washers, gaskets, and drain tube assembly. Professional installation is recommended to ensure proper torque specs and gasket sealing are met.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915764953397,"sku":"CT-247-4510","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/CT-247-4510-1_1.webp?v=1784139377"},{"product_id":"exhaust-manifold-kit-for-2009-2024-dodge-ram-1500-2500-3500-5-7l-hemi","title":"Exhaust Manifold Kit for 2009-2024 Dodge Ram 1500 2500 3500 5.7L Hemi","description":"\u003cp\u003eThis exhaust manifold kit replaces the warp-prone factory exhaust manifolds with a high-silicon ductile iron casting and an upgraded fastening system to permanently resolve chronic exhaust tick and gasket failure. Direct-fit for 2009–2024 Ram 1500 DS, 2009–2018 Ram 2500 DJ, 2013–2018 Ram 3500 D2, and 2011–2015 Ram 3500 DC equipped with 5.7L HEMI engines. The 5.7L HEMI engine generates extreme exhaust gas temperatures, causing the factory cast-iron manifolds to undergo rapid, severe thermal expansion and contraction. Because the OEM mounting design restricts this natural movement, the rear manifold bolts experience excessive shear stress, eventually snapping off flush with the cylinder head, creating a highly audible exhaust tick and compromising the exhaust gasket seal.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2009–2024 Dodge Ram 1500 (DS body style) 5.7L HEMI\u003c\/li\u003e\n  \u003cli\u003e2009–2018 Dodge Ram 2500 (DJ chassis) 5.7L HEMI\u003c\/li\u003e\n  \u003cli\u003e2013–2018 Dodge Ram 3500 (D2 chassis) 5.7L HEMI\u003c\/li\u003e\n  \u003cli\u003e2011–2015 Dodge Ram 3500 (DC chassis) 5.7L HEMI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-silicon ductile iron construction, vastly improving the material's yield strength and thermal fatigue resistance compared to stock components\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Thicker flange and thicker runner wall design further guarantee resistance to heat distortion and warping under heavy engine load\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFastening System:\u003c\/strong\u003e Extended fasteners paired with precision-engineered spacers allow the manifold to thermally expand and contract without transferring shear load to the bolt heads\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat Shield:\u003c\/strong\u003e The heat shield features independent mounting locations, entirely isolating it from the main manifold-to-head fasteners\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Comes with all new bolts, nuts, spacers, and gaskets for a hassle-free installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment Note:\u003c\/strong\u003e For 2019+ 1500 models, verify the 6th VIN digit is 6 or 7 (DS model). Will NOT fit 2019+ DT body style\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 2 hours 18 minutes. This is a complete bolt-on kit with all fasteners and gaskets included; however, professional installation is recommended to ensure proper torque specifications and sealing.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915765051701,"sku":"RG-478-0924","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/RG-478-0924-2.webp?v=1780006722"},{"product_id":"high-flow-ss-exhaust-manifold-kit-for-2009-24-dodge-ram-1500-2500-3500-5-7-hemi","title":"High Flow SS Exhaust Manifold Kit for 2009–24 Dodge Ram 1500 2500 3500 5.7 HEMI","description":"\u003cp\u003eThis High Flow Stainless Steel Exhaust Manifold Kit for 2009–24 Dodge Ram 1500, 2500, and 3500 with the 5.7L HEMI improves exhaust efficiency and reduces backpressure. Crafted from premium 409 stainless steel, this kit improves exhaust efficiency, enhances throttle response, and reduces backpressure. The high-flow design supports smoother exhaust gas movement while the stainless steel construction helps resist heat stress and corrosion. This kit is a direct-fit replacement for factory manifolds that are cracked, warped, leaking, or causing exhaust ticking.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2009–2024 Dodge Ram 1500 (DS body style) — 5.7L HEMI V8\u003c\/li\u003e\n  \u003cli\u003e2009–2018 Dodge Ram 2500 (DJ) — 5.7L HEMI V8\u003c\/li\u003e\n  \u003cli\u003e2011–2018 Dodge Ram 3500 (D2\/DC) — 5.7L HEMI V8\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Premium 409 stainless steel construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e All gaskets and fasteners\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign Features:\u003c\/strong\u003e High-flow passages designed to reduce exhaust backpressure and improve scavenging\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance:\u003c\/strong\u003e Stainless steel resists rust and heat-related degradation in high-temperature exhaust environments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Engineered to prevent warping and cracking common in factory manifolds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis exhaust manifold features a bolt-on design with precision-engineered fitment at OE mounting locations for straightforward installation. Estimated install time is approximately 2 hours and 18 minutes. Professional installation is recommended if broken bolts are encountered during manifold removal.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915765150005,"sku":"RG-555-0924","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/RG-555-0924-1.webp?v=1780272801"},{"product_id":"exhaust-manifold-kit-for-5-7l-hemi-ram-1500-dt-19-24-durango-jeep-cherokee-11-22","title":"Exhaust Manifold Kit For 5.7L HEMI RAM 1500 DT 19-24 Durango JEEP Cherokee 11-22","description":"\u003cp\u003eThis 5.7L HEMI exhaust manifold kit is constructed from high-silicon ductile iron with uniform wall thickness throughout to prevent warping or cracking. Designed for the 2019–2024 Ram 1500 DT, Dodge Durango, and 2011–2022 Jeep Cherokee, it replaces worn, cracked, or leaking factory manifolds to restore proper exhaust sealing and eliminate ticking noises, exhaust leaks, poor performance, and increased engine bay noise.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2019–2024 Ram 1500 DT -- VIN 6th digit E or F\u003c\/li\u003e\n  \u003cli\u003e2011–2022 Dodge Durango -- 5.7L HEMI\u003c\/li\u003e\n  \u003cli\u003e2011–2022 Jeep Grand Cherokee -- 5.7L HEMI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-silicon ductile iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWall Thickness:\u003c\/strong\u003e Uniform throughout entire manifold to prevent warping or cracking\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Longer bolts and added spacers to reduce stress on fasteners; includes all new bolts, nuts, spacers, and gaskets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat Shield:\u003c\/strong\u003e Independent mounting location for the heat shield, separated from mounting bolts to enhance reliability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt Mating Surfaces:\u003c\/strong\u003e Machined for secure bolted joint\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Time:\u003c\/strong\u003e Approximately 5 hours 12 minutes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 36 months \/ 75,000 miles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEmissions Compliance:\u003c\/strong\u003e Does not require EO in California; 50 state legal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Interchange:\u003c\/strong\u003e Left side 68591573AB; Right side 68591572AB, 68021512BA\/AD\/AE\/AF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment Note:\u003c\/strong\u003e For 2019+ Ram 1500 DT models, the 6th digit of the VIN designates truck model; E or F indicates DT body style compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis exhaust manifold kit bolts directly to the cylinder head without frame modification or custom fabrication. Extended fasteners and spacers effectively withstand thermal expansion, addressing the common failure of stock manifold bolts from repeated heat cycles.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915765215541,"sku":"RG-557-1924","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/RG-557-1924-1.webp?v=1780273110"},{"product_id":"upgraded-stainless-exhaust-manifold-kit-2019-2024-ram-1500-2500-3500-5-7-hemi","title":"Upgraded Stainless Exhaust Manifold Kit 2019–2024 Ram 1500 2500 3500 5.7 HEMI","description":"\u003cp\u003eThis Upgraded Stainless Exhaust Manifold Kit is designed for 2019–2024 Ram 1500, 2500, and 3500 trucks equipped with the 5.7L HEMI engine. The kit includes uniform wall thickness throughout the entire manifold to prevent warping or cracking, and utilizes longer bolts and added spacers to reduce stress on fasteners. Built to address common issues including ticking noise, broken manifold bolts or studs, warped flanges, and gasket leaks, this exhaust manifold kit delivers proven reliability where OEM components fail.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2019–2024 Ram 1500 DT (New Body Style)\u003c\/strong\u003e — 5.7L HEMI; VIN digit 6 is E or F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2019–2024 Ram 2500 DJ, 2500 DC\u003c\/strong\u003e — 5.7L HEMI (select years)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2019–2024 Ram 3500 DC\u003c\/strong\u003e — 5.7L HEMI (select years)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Does not fit 2019+ DS (Classic) body style Ram 1500. Verify VIN before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless construction with uniform wall thickness to prevent warping or cracking\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Kit includes all new bolts, nuts, spacers, and gaskets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFastener Upgrade:\u003c\/strong\u003e Longer bolts and added spacers reduce stress on fasteners\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat Shield:\u003c\/strong\u003e Independent mounting location for heat shield to further reduce stress on fasteners\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt Specifications:\u003c\/strong\u003e M8 x 60mm hex bolts (Qty: 10), 3\/8\" x 2.5\" hex flange bolts (Qty: 2), 3\/8\" hex flange nuts (Qty: 2), M6 x 12mm hex flange bolts (Qty: 5)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTorque Values:\u003c\/strong\u003e Manifold bolts torque to 10 N-m (89 in-lb) with 10mm wrench; Heat shield fasteners torque to 50 N-m (37 ft-lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 36-month \/ 75,000-mile limited parts warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation requires approximately 5 hours 12 minutes. This is a driver-side and passenger-side manifold replacement that requires removal of wheels, fender-liners, heat shields, and bolts. Professional installation is strongly recommended due to tight engine bay clearance and the risk of damaging broken bolt extraction.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915765313845,"sku":"RG-557-1-1924","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/RG-557-1-1924-1.webp?v=1780273371"},{"product_id":"upgraded-exhaust-manifold-kit-for-11-16-ford-f-150-expedition-3-5l-ecoboost","title":"Upgraded Exhaust Manifold Kit For 11-16 Ford F-150 \/ Expedition 3.5L Ecoboost","description":"\u003cp\u003eThis Upgraded Exhaust Manifold Kit for 2011–2016 Ford F-150 and Expedition 3.5L EcoBoost is built from thicker-walled high silicone ductile iron designed to resist thermal warping, with 22 exhaust spacers and 22 class 8.8 studs. Built to replace cracked, warped, or leaking factory manifolds, it helps restore proper exhaust flow, turbo performance, and engine reliability. The factory manifold only utilizes 8 of the 11 available stud locations; this upgraded kit uses all 11 stud locations, improves exhaust flow, and offers improved durability.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2011-2016 Ford F-150 V6 3.5L EcoBoost (naturally aspirated and turbocharged)\u003c\/li\u003e\n  \u003cli\u003e2015-2017 Ford Expedition V6 3.5L EcoBoost\u003c\/li\u003e\n  \u003cli\u003e2015-2017 Lincoln Navigator V6 3.5L EcoBoost\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High Silicon Ductile Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStud Utilization:\u003c\/strong\u003e Utilizes all 11 available cylinder head stud locations (vs. OE's 8 locations)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e 22 exhaust spacers and 22 class 8.8 studs for enhanced thermal durability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Design:\u003c\/strong\u003e Port matched to the cylinder head to optimize efficiency and promote quicker turbo spool up\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEmissions:\u003c\/strong\u003e CARB EO certified (legal for use in all 50 states)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCommon Issues Addressed:\u003c\/strong\u003e A leaking exhaust manifold causes ticking noises, loss of boost efficiency, poor drivability, and increased engine bay heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe F-150 3.5L EcoBoost manifolds require approximately 8 hours to install with appropriate facilities. This is a comprehensive job requiring removal of the turbochargers and front exhaust system for proper access and installation.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915765379381,"sku":"FO-483-1116","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FO-483-1116-1.webp?v=1780273679"},{"product_id":"upgraded-exhaust-manifold-kit-for-2015-2017-lincoln-navigator-3-5l-ecoboost","title":"Upgraded Exhaust Manifold Kit For 2015-2017 Lincoln Navigator 3.5L Ecoboost","description":"\u003cp\u003e\u003ccite index=\"8-1\"\u003eThis Upgraded Exhaust Manifold Kit is designed for 2015–2017 Lincoln Navigator models equipped with the 3.5L EcoBoost engine and uses all 11 stud locations for a more secure, even seal against the cylinder head.\u003c\/cite\u003e It replaces factory manifolds suffering from \u003ccite index=\"4-18,4-19\"\u003ea design flaw where OEM stud locations are underutilized—the cylinder head has threaded holes for 11 exhaust studs, but the OE manifold only utilizes 8 of those locations.\u003c\/cite\u003e \u003ccite index=\"8-6,8-7\"\u003eMade from high-silicon molybdenum cast iron, these upgraded manifolds are significantly more resistant to thermal warping and cracking, with exhaust runners port-matched and redesigned to increase flow by over 30% compared to stock manifolds.\u003c\/cite\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ccite index=\"6-12\"\u003e2015–2017 Lincoln Navigator — 3.5L EcoBoost V6\u003c\/cite\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e \u003ccite index=\"1-2\"\u003e1x Performance Drivers Side Manifold, 1x Performance Passenger Side Manifold, 16x W712244-S300 Manifold Studs, 16x W701706-S440 Grade 10 Locking Manifold Nuts, Install Manual\u003c\/cite\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003ccite index=\"8-6\"\u003eHigh-silicon molybdenum cast iron\u003c\/cite\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStud Coverage:\u003c\/strong\u003e \u003ccite index=\"8-1,8-5\"\u003eUses all 11 stud locations for secure, even clamping pressure\u003c\/cite\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Improvement:\u003c\/strong\u003e \u003ccite index=\"8-7\"\u003eExhaust runners port-matched and redesigned to increase flow by over 30% compared to stock\u003c\/cite\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Replacement:\u003c\/strong\u003e \u003ccite index=\"3-1\"\u003eReplaces Ford OEM part numbers BL3Z-9430-B, BL3Z-9430-D, BL3Z-9431-B, BL3Z-9431-D\u003c\/cite\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdditional Hardware Required:\u003c\/strong\u003e \u003ccite index=\"1-4\"\u003eOEM manifold gaskets and turbine housing gaskets are recommended for installation\u003c\/cite\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003ccite index=\"4-14\"\u003eProfessional installation is required.\u003c\/cite\u003e This is a direct replacement using factory mounting points, but gasket replacement and proper torque sequencing are critical for preventing exhaust leaks and achieving the full benefit of the upgraded 11-stud design.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915765444917,"sku":"LN-544-1517","price":278.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/LN-544-1517-1.webp?v=1780274058"},{"product_id":"turbo-exhaust-manifold-install-kit-for-15-17-lincoln-navigator-3-5l-ecoboost","title":"Turbo Exhaust Manifold Install Kit For 15-17 Lincoln Navigator 3.5L ECOBOOST","description":"\u003cp\u003eThis Turbo Exhaust Manifold Install Kit for 2015–2017 Lincoln Navigator 3.5L EcoBoost includes 15mm longer exhaust studs, spacers, and nuts to support manifold replacement, turbo service, or turbo removal and reinstallation work. Designed for the twin-turbocharged 3.5L EcoBoost platform, this kit ensures a clean, secure installation and proper exhaust sealing under demanding boost conditions.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2015-2017 Lincoln Navigator — 3.5L EcoBoost Twin-Turbo V6\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Extended exhaust studs (15mm longer than OEM), mounting spacers, and hex nuts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Class 8.8 studs designed to improve thermal durability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Manifold replacement, turbo service, removal and reinstallation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits 2015-2017 Lincoln Navigator 3.5L EcoBoost with turbocharger mounting points\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Time:\u003c\/strong\u003e Approximately 8 hours of labor for professional service technician work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSpray penetrating oil on the turbo hardware and let it soak overnight before attempting removal. Apply anti-seize coating to all threaded surfaces prior to install. Professional installation is strongly recommended for this exhaust manifold install kit and turbocharger work.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915765510453,"sku":"LN-543-1517","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/LN-543-1517-1.webp?v=1780274410"},{"product_id":"high-flow-exhaust-manifold-kit-for-2017-2020-ford-f-150-f150-3-5l-ecoboost","title":"HIGH FLOW Exhaust Manifold Kit For 2017-2020 Ford F-150 F150 3.5L Ecoboost","description":"\u003cp\u003eThis high-flow exhaust manifold kit is specifically designed for the 2017-2020 Ford F-150 3.5L EcoBoost, delivering improved exhaust flow before the turbo to support faster spool and stronger engine breathing. The high-flow design increases efficiency with 16% better flow capability than OEM manifolds, replacing factory manifolds that crack, warp, or leak while reducing exhaust ticking, boost loss, and engine bay heat.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2017-2020 Ford F-150 3.5L EcoBoost\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-silicon ductile iron construction designed to combat warping\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Improvement:\u003c\/strong\u003e 16% better flow capability versus OEM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurability Design:\u003c\/strong\u003e Two additional bolt holes per manifold with extended fasteners and spacers to better withstand thermal expansion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCasting:\u003c\/strong\u003e Uniform wall thickness casting with thicker robust design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e Complete kit with gaskets and hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation requires approximately 9 hours. Professional installation is strongly recommended due to turbocharger and exhaust system complexity.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915765575989,"sku":"FO-562-1720","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FO-562-1720-1.webp?v=1780274779"},{"product_id":"upgraded-oe-replacement-exhaust-manifolds-for-pair-99-5-03-ford-7-3l-powerstroke","title":"Upgraded OE Replacement Exhaust Manifolds For Pair 99.5-03 Ford 7.3L Powerstroke","description":"\u003cp\u003eThis OE replacement exhaust manifold pair for 1999.5-2003 Ford 7.3L Powerstroke F250, F350, and F450 restores factory function for cracked, warped, leaking, or corroded manifolds. Cast iron construction protects against warping or cracking, and these manifolds are strengthened and redesigned in the vulnerable areas of failure to ensure long-term reliability for daily driving, towing, and heavy-duty diesel use.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999.5-2003 Ford F250, F350, F450 — 7.3L Powerstroke Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Direct replacement for factory manifolds on 1999.5-2003 models\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Driver and passenger side exhaust manifold pair\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-Year Warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Each manifold includes (1) exhaust manifold, (1) gasket (manifold to cylinder head), (2) studs (manifold to exhaust pipe flange), and (2) nuts (manifold to exhaust pipe flange)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e F81Z9431AA, F81Z9430AA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eHeat-shield may be included for protection of engine components where applicable. Installation requires manifold removal and gasket replacement; professional installation is recommended to ensure proper torque specifications and leak-free sealing.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915767116085,"sku":"FP-252-9903","price":199.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-252-9903-1.webp?v=1780531726"},{"product_id":"4-turbo-diesel-exhaust-pipe-for-2020-2025-ford-f250-f350-f450-f550-6-7l-diesel","title":"4\" Turbo Diesel Exhaust Pipe For 2020-2025 Ford F250 F350 F450 F550 6.7L Diesel","description":"\u003cp\u003eThis 4-inch turbo diesel exhaust pipe is designed for 2020–2025 Ford Super Duty F-250, F-350, F-450, and F-550 trucks equipped with the 6.7L Powerstroke diesel engine. It improves exhaust flow from the turbo system by increasing pipe diameter and reducing factory restrictions, supporting enhanced performance and durability. Built as a direct replacement for factory-style exhaust piping, the 4-inch design is engineered for diesel engines producing less than 450 horsepower.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2020-2025 Ford F-250 Super Duty 6.7L Powerstroke Diesel\u003c\/li\u003e\n  \u003cli\u003e2020-2025 Ford F-350 Super Duty 6.7L Powerstroke Diesel\u003c\/li\u003e\n  \u003cli\u003e2020-2025 Ford F-450 Super Duty 6.7L Powerstroke Diesel\u003c\/li\u003e\n  \u003cli\u003e2020-2025 Ford F-550 Super Duty 6.7L Powerstroke Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T409 stainless steel, resistant to corrosion and high-temperature fatigue\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Smooth mandrel-bent tubing for optimized exhaust flow, replacing factory crimped bends\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e Reduces exhaust gas temperatures, increases horsepower and torque potential, and improves fuel economy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Designed for vehicles producing less than 450 horsepower with standard tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis turbo diesel exhaust pipe uses factory mounting points and bolt-together connections for straightforward installation. Professional installation is recommended to ensure proper alignment and seal integrity.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915770884405,"sku":"FP-527-2025","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-527-2025-1.webp?v=1780531467"},{"product_id":"4-turbo-exhaust-pipe-tube-for-ford-f250-f350-f450-f550-6-7l-powerstroke-diesel","title":"4\" Turbo Exhaust Pipe Tube For Ford F250 F350 F450 F550 6.7L Powerstroke Diesel","description":"\u003cp\u003eThis 4-inch turbo exhaust pipe tube for Ford F-250, F-350, F-450, and F-550 with 6.7L Powerstroke is constructed from high-quality 304 stainless steel or T409 stainless steel, delivering a direct-fit replacement for your factory turbo exhaust pipe. It increases exhaust flow by replacing factory crimped bends with smooth tubing and reduces the restriction that comes with aging, damaged, or stock exhaust piping. Designed for diesel repair, performance upgrades, and custom exhaust setups, this tube supports better turbo response and lower exhaust gas temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2011–2019 Ford F-250 Super Duty -- 6.7L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e2011–2019 Ford F-350 Super Duty -- 6.7L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e2011–2019 Ford F-450 Super Duty -- 6.7L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e2015–2024 Ford F-550 Super Duty -- 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel or T409 stainless steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Designed for vehicles creating less than 450 horsepower\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBenefits:\u003c\/strong\u003e Reduces exhaust gas temperatures, increases horsepower and torque, improves fuel mileage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Direct-fit turbo exhaust pipe replacement; uses factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis tube bolts directly to the turbo outlet and existing exhaust system. Professional installation is recommended to ensure proper seal and alignment, as improper fitment can result in exhaust leaks and reduced performance.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915770982709,"sku":"FP-410-","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-410-1.webp?v=1780531472"},{"product_id":"high-flow-heavy-duty-exhaust-manifolds-for-15-19-ford-6-7l-powerstroke-diesel","title":"HIGH FLOW Heavy Duty Exhaust Manifolds For 15-19 Ford 6.7L Powerstroke Diesel","description":"\u003cp\u003eThese heavy-duty exhaust manifolds for 2015–2019 Ford 6.7L Powerstroke are crafted with 0.275-inch thick-walled hi-silicon ductile casting, 75% thicker than factory manifolds, and engineered with optimized exhaust port sizes to maximize exhaust flow. These manifolds address one of the Ford 6.7L's common failure points. Built to eliminate cracking, leaks, and warping caused by high exhaust temperatures, they deliver proven turbo response and durability for work trucks, towing, hauling, and daily driving.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2015–2016 Ford 6.7L Powerstroke — F-250, F-350 (pickup)\u003c\/li\u003e\n  \u003cli\u003e2017–2019 Ford 6.7L Powerstroke — F-250, F-350 (pickup); F-350, F-450, F-550 (cab\/chassis)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hi-silicon ductile cast iron with 0.275-inch thick walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Optimization:\u003c\/strong\u003e Computational fluid dynamics were used to optimize flow and exhaust port sizes have been increased to match gaskets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance Gain:\u003c\/strong\u003e Average flow increase of approximately 8.1% per port versus OEM (OEM approximately 169 CFM per port versus aftermarket approximately 174 CFM per port)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThermal Durability:\u003c\/strong\u003e Longer exhaust studs and spacers plus thicker, more durable machined bolting flanges\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat Protection:\u003c\/strong\u003e POR15 black high-temperature coating helps the manifold resist corrosion over time\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Left and right exhaust manifolds, longest stud and spacer kit, manifold gaskets, crossover tube gasket, EGR port gasket, and M8 stud install tool\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEmissions Compliance:\u003c\/strong\u003e Fully EGR compatible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 40.0 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation requires approximately 9 hours and demands careful removal of shields, CAC plumbing, and related lines. Professional installation is recommended to ensure proper stud torque sequencing and gasket sealing.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915771146549,"sku":"FP-482-1519","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-482-1519-1.webp?v=1780531608"},{"product_id":"high-flow-3-turbo-exhaust-pipe-for-2001-2004-chevy-gmc-6-6l-duramax-lb7-diesel","title":"High Flow 3\" Turbo Exhaust Pipe For 2001-2004 Chevy GMC 6.6L Duramax LB7 Diesel","description":"\u003cp\u003eThis 3\" mandrel bent turbo exhaust pipe is designed for 2001–2004 Chevy and GMC 6.6L Duramax LB7 diesel engines, manufactured from 304 stainless steel with an OEM style 3-bolt flange. It reduces restriction from the factory turbo area to support improved exhaust flow and turbo efficiency. Built as a direct replacement for aging, damaged, or restrictive factory piping, this turbo exhaust pipe delivers measurable performance gains for Duramax owners.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2001–2004 Chevrolet Silverado 2500HD \/ 2500 — 6.6L Duramax LB7\u003c\/li\u003e\n  \u003cli\u003e2001–2004 GMC Sierra 2500HD \/ 2500 — 6.6L Duramax LB7\u003c\/li\u003e\n  \u003cli\u003e2001–2004 Chevrolet Silverado 3500HD \/ 3500 — 6.6L Duramax LB7\u003c\/li\u003e\n  \u003cli\u003e2001–2004 GMC Sierra 3500HD \/ 3500 — 6.6L Duramax LB7\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Material:\u003c\/strong\u003e 304 stainless steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 3 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube Construction:\u003c\/strong\u003e Mandrel bent for higher flow than stock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlange Design:\u003c\/strong\u003e OEM style 3-bolt flange with laser cut edges\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat Management:\u003c\/strong\u003e Includes heat wrap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBellows:\u003c\/strong\u003e High performance bellow for flex and durability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Direct bolt-on installation; includes gaskets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eDirect bolt-on installation uses the OEM 3-bolt flange connection and includes gaskets for a sealed fit. Professional installation is recommended to ensure proper alignment and torque specifications.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915772391733,"sku":"GM-276-0104","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/GM-276-0104-1.webp?v=1780531582"},{"product_id":"driver-side-exhaust-manifold-no-pinch-for-2001-2015-chevy-gmc-6-6-duramax-diesel","title":"Driver Side Exhaust Manifold NO PINCH For 2001-2015 Chevy GMC 6.6 Duramax Diesel","description":"\u003cp\u003eThis driver-side no-pinch exhaust manifold fits 2001–2015 GM 6.6L Duramax diesel engines as a direct bolt-on upgrade for 2001–2008 trucks. The factory manifold was formed with a pinch\/crease for steering column clearance that restricts three of the four cylinders on the driver side to 80% flow, causing exhaust pressure imbalance and higher EGTs. This no-pinch design removes that restriction to restore flow, supporting better turbo response and overall exhaust efficiency for daily driving, towing, hauling, and performance-focused builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2001–2008 Chevrolet Silverado and GMC Sierra 2500\/3500 with 6.6L Duramax diesel (direct bolt-on)\u003c\/li\u003e\n  \u003cli\u003e2009–2015 Chevrolet Silverado and GMC Sierra 2500\/3500 with 6.6L Duramax diesel (factory replacement)\u003c\/li\u003e\n  \u003cli\u003eCompatible with LB7, LLY, LBZ, LMM, and LML engine codes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-quality ductile silica moly cast iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.8 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 9.0\" W × 4.0\" H × 25.0\" L\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Exhaust manifold gasket, exhaust outlet gasket, and three Y-pipe bolts with washers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance Benefits:\u003c\/strong\u003e Flows better than the original driver-side manifold with less restriction to match passenger-side manifold flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is a direct bolt-on upgrade for 2001–2008 trucks; consult with a qualified mechanic before attempting installation. All necessary gaskets and fasteners are included for driver-side installation only.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915772522805,"sku":"GM-355-0115","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/GM-355-0115-1.webp?v=1780531510"},{"product_id":"high-flow-exhaust-manifolds-up-pipes-for-01-04-chevy-gmc-6-6l-duramax-diesel","title":"High Flow Exhaust Manifolds \u0026 Up Pipes for 01-04 Chevy GMC 6.6L Duramax Diesel","description":"\u003cp\u003eHigh-flow exhaust manifolds made from cast, high-sil moly and up-pipe bellows internally sleeved from aircraft-grade 304 stainless steel with increased inner diameter for higher flow designed for 2001–2004 Chevy and GMC 6.6L Duramax LB7 diesel engines. This kit improves exhaust flow to the turbocharger, reduces restriction, and restores reliable exhaust sealing. Ideal for replacing cracked manifolds, leaking up pipes, or restrictive factory components, this high flow exhaust manifold and up pipes kit supports better turbo efficiency, improved drivability, and long-term durability.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2001–2004 Chevrolet Silverado 2500HD, 2500, 3500HD, 3500 -- LB7\u003c\/li\u003e\n  \u003cli\u003e2001–2004 GMC Sierra 2500HD, 2500, 3500HD, 3500 -- LB7\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManifolds:\u003c\/strong\u003e Cast, high-sil moly construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUp-Pipes:\u003c\/strong\u003e 11 gauge 304 stainless steel with internally sleeved aircraft-grade 304 stainless steel bellows and increased inner diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Improvement:\u003c\/strong\u003e 53% greater flow over stock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEmissions:\u003c\/strong\u003e 50 States Emissions Legal (E.O. D-701-34)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e Designed to maximize power and flow characteristics, lower exhaust gas temperatures (EGTs) and accelerate turbo spool-up while increasing power, fuel economy, and maintaining reliability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Two exhaust manifold gaskets, two up-pipe to turbo gaskets, two up-pipe to manifold gaskets, and bolts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCeramic Coating Option:\u003c\/strong\u003e Available to enhance the existing benefits of the high-flow exhaust manifold and up-pipes kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe factory downpipe (2001-2004 LB7 only) does not fit aftermarket manifolds and up-pipes—a separate aftermarket 3-inch down pipe is required. Installation requires removal of factory exhaust components and manifold mounting bolts; professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915772621109,"sku":"GM-MQRMQL-0104","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/GM-MQRMQL-0104-1.webp?v=1780531598"},{"product_id":"3-turbo-exhaust-pipe-w-heat-wrap-for-2011-2015-chevy-gmc-6-6l-lml-duramax","title":"3\" Turbo Exhaust Pipe W Heat Wrap For 2011-2015 Chevy GMC 6.6L LML Duramax","description":"\u003cp\u003eThis 3-inch turbo exhaust pipe is built from mandrel bent 304 thick wall stainless steel for 2011–2015 Chevy and GMC 6.6L LML Duramax diesel engines. A fiberglass based heat wrap is included to provide insulation from the passenger compartment and firewall due to the proximity of the larger, higher flowing pipe. This turbo exhaust pipe replaces restrictive factory downpipe designs to support improved exhaust flow, reduced backpressure, lower EGTs, and enhanced turbo response.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2011 to EARLY 2015 Chevrolet Silverado\/Sierra 2500HD\/3500, Extended-Crew Cab\/Short-Long Bed – 6.6L LML V8 Diesel\u003c\/li\u003e\n  \u003cli\u003eNote: The 2011-2015 downpipe uses a V-band style clamp; the 2015.5-2016 uses a 3-bolt flange style connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 thick wall stainless steel, mandrel bent\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat Wrap:\u003c\/strong\u003e Fiberglass based heat wrap for insulation and thermal management\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Turbo outlet down pipe\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance Benefits:\u003c\/strong\u003e Eliminates crushed sections found in OEM design, reduces backpressure for quicker turbo response and lower EGTs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is recommended. Verify your truck's clamp style (V-band vs. 3-bolt flange) before purchase to confirm fitment.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915773112629,"sku":"GM-327-1115","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/GM-327-1115-1.webp?v=1780531442"},{"product_id":"high-flow-exhaust-manifold-for-2017-2025-chevy-gmc-6-6l-duramax-l5p-diesel","title":"High Flow Exhaust Manifold for 2017–2025 Chevy GMC 6.6L Duramax L5P Diesel","description":"\u003cp\u003eThis High Flow Exhaust Manifold for 2017–2025 Chevy and GMC trucks equipped with the 6.6L Duramax L5P diesel is made from cast, high-sil moly and is engineered to improve exhaust flow, reduce restriction, and support better turbo response. The manifold and up-pipe exhaust system are designed to maximize power and flow characteristics, lower exhaust gas temperatures (EGTs) and accelerate turbo spool-up while increasing power, fuel economy, and maintaining reliability. Built for heavy-duty diesel use, this manifold is a reliable upgrade for replacing cracked, leaking, warped, or restrictive factory-style components and is suitable for daily driving, towing, hauling, and performance-focused Duramax applications.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2017–2019 Chevrolet Silverado 2500\/3500 HD -- 6.6L Duramax L5P\u003c\/li\u003e\n  \u003cli\u003e2017–2019 GMC Sierra 2500\/3500 HD -- 6.6L Duramax L5P\u003c\/li\u003e\n  \u003cli\u003e2020–2025 Chevrolet Silverado 2500\/3500 HD -- 6.6L Duramax L5P\u003c\/li\u003e\n  \u003cli\u003e2020–2025 GMC Sierra 2500\/3500 HD -- 6.6L Duramax L5P\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast high-sil moly construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUp-Pipe Construction:\u003c\/strong\u003e Aircraft-grade 304 stainless steel bellows with internally sleeved design and increased inner diameter for higher flow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUp-Pipe Wall Thickness:\u003c\/strong\u003e .120-inch wall thickness with 2-inch outside diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance Benefits:\u003c\/strong\u003e Lowers exhaust gas temperatures (EGTs), accelerates turbo spool-up, and increases power and fuel economy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEGT Port:\u003c\/strong\u003e Pre-molded and tapped for EGT gauge sensor installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Includes 16 exhaust manifold mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is a direct-fit replacement for factory manifolds on 2017–2025 models. Professional installation is recommended to ensure proper sealing and turbo response optimization. Remove factory manifolds and bolt-on this high flow exhaust manifold assembly using OEM or upgraded fasteners.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915774030133,"sku":"GM-570-1725","price":594.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/GM-570-1725-1.webp?v=1780542702"},{"product_id":"3-turbo-pipe-w-heat-wrap-for-3-bolt-flange-15-5-16-chevy-gmc-6-6l-lml-duramax","title":"3\" Turbo Pipe W Heat Wrap For 3 Bolt Flange 15.5-16 Chevy GMC 6.6L LML Duramax","description":"\u003cp\u003eThis 3\" stainless steel turbo pipe with heat wrap and clamps is designed for 2015.5–2016 Chevy and GMC 6.6L LML Duramax diesel engines equipped with a 3-bolt flange turbo connection. The smooth and consistent 3\" bore throughout the entire length provides better CFM flow over the stock down-pipe, improving exhaust scavenging and heat management in the turbo bay. The fiberglass-based heat wrap provides further insulation from the passenger compartment and firewall while reducing radiant heat around nearby components.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2015.5–2016 Chevy Silverado\/GMC Sierra 2500HD\/3500HD — 6.6L LML Duramax, 3-bolt flange style connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 304 stainless steel, TIG welded and jig built\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3 inch bore throughout\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlange:\u003c\/strong\u003e 3-bolt flange with zinc-coated flanges and 3-bolt flange hardware included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat Protection:\u003c\/strong\u003e Fiberglass heat wrap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Compatibility:\u003c\/strong\u003e All 3 factory location emission sensor bungs included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e Consistent 3\" bore equates to better CFM flow over stock down-pipe, supporting lower EGT management\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is a direct replacement for the factory turbo outlet pipe. Bolt the 3-bolt flange connection directly to your turbo outlet, secure the lower flange to the factory mounting location, and wrap the included heat wrap around the pipe body. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915774128437,"sku":"GM-315-1516","price":128.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/GM-315-1516-1.webp?v=1780531450"},{"product_id":"03-07-ford-powerstroke-f250-f350-60-stainless-performance-exhaust-manifolds","title":"03-07 Ford Powerstroke F250 F350 6.0 Stainless Performance Exhaust Manifolds","description":"\u003cp\u003eStainless steel exhaust manifolds designed as a direct replacement for stock manifolds on 2003–2007 Ford F-250 and F-350 Super Duty trucks equipped with the 6.0L Powerstroke diesel engine. These performance exhaust manifolds deliver improved sound, improved MPG, improved throttle response, more torque, more horsepower, and lower EGTs. Built to eliminate cracked, warped, or leaking factory manifolds while supporting better turbo response and durability during daily driving, towing, hauling, and heavy-duty diesel use.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2003–2007 Ford F-250 Super Duty 6.0L Powerstroke Diesel\u003c\/li\u003e\n  \u003cli\u003e2003–2007 Ford F-350 Super Duty 6.0L Powerstroke Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel with mirror polish surface\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Set of 2 manifolds with 2 gaskets included for complete installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Function:\u003c\/strong\u003e Improved exhaust flow, reduced exhaust gas temperature, enhanced turbocharger spool response\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat \u0026amp; Corrosion Resistance:\u003c\/strong\u003e Stainless steel construction resists warping, cracking, and corrosion under sustained high-temperature diesel operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is highly recommended. Installation on the driver's side requires removal of the dipstick tube and loosening of the up-pipes to ensure proper sealing. Verify fitment with your specific truck configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52916540440885,"sku":"FP-412-0307","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-412-0307-1.webp?v=1780531395"},{"product_id":"high-flow-upgraded-exhaust-manifolds-for-03-07-ford-60l-powerstroke-f250-f350","title":"HIGH FLOW Upgraded Exhaust Manifolds For 03-07 Ford 6.0L Powerstroke F250 F350","description":"\u003cp\u003eHigh-flow upgraded exhaust manifolds for 2003–2007 Ford F-250 and F-350 with the 6.0L Powerstroke engine, designed to restore proper exhaust sealing, improve flow, and support turbo efficiency. These manifolds replace cracked, warped, leaking, or restrictive factory manifolds that commonly fail from heat cycles and corrosion. Built with heavy-walled elbow connections, these manifolds help prevent burn-through while retaining exhaust gas temperatures to improve turbine efficiency and overall exhaust flow.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2003–2007 Ford F-250 Super Duty -- 6.0L Powerstroke Diesel\u003c\/li\u003e\n  \u003cli\u003e2003–2007 Ford F-350 Super Duty -- 6.0L Powerstroke Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-silicon ductile iron for greater durability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Tubular manifold design with equal-length runners for balanced exhaust reversion, mandrel bent pipes to maintain free flow, and TIG welded joints for cracking resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Coated to resist corrosion and pre-drilled for pyrometer probe installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign Focus:\u003c\/strong\u003e Runners engineered to improve cylinder evacuation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Includes gaskets and fasteners for proper sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is recommended for this exhaust manifold upgrade. Driver's side requires removal of the dipstick tube, and loosening the up-pipes helps achieve a good seal.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52916541653301,"sku":"FP-580-0307","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-580-0307-1.webp?v=1780531640"},{"product_id":"ac-hose-for-high-flow-up-pipe-exhaust-manifold-2008-10-ford-64l-powerstroke","title":"A\/C Hose for HIGH FLOW Up Pipe \u0026 Exhaust Manifold 2008-10 Ford 6.4L Powerstroke","description":"\u003cp\u003eThis A\/C Hose is designed for 2008–2010 Ford 6.4L Powerstroke applications using a high-flow up pipe and exhaust manifold setup. It helps provide proper A\/C system routing and clearance when upgrading or servicing the exhaust manifold and up-pipe area. The A\/C offset adapter eliminates damaging the A\/C hose during high-flow manifold installations, maintaining air conditioning function while allowing better fitment around upgraded exhaust components.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2008–2010 Ford F-250, F-350, F-450, F-550 Super Duty — 6.4L Powerstroke Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Designed as an A\/C offset adapter for high-flow up pipe and exhaust manifold kits\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Provides proper A\/C routing clearance during high-flow manifold and up-pipe installations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Direct fit for 2008–2010 6.4L Powerstroke diesel engines with upgraded exhaust components\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePurpose:\u003c\/strong\u003e Protects A\/C system from damage while maintaining performance hose routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis A\/C hose adapter supports professional installation of high-flow manifold and up-pipe systems. Position the adapter to route the A\/C hose away from hot exhaust components, then secure all connections per manufacturer specifications.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52916543258933,"sku":"FP-97-0810","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-97-0810-1.webp?v=1780531488"},{"product_id":"high-flow-up-pipe-exhaust-manifold-kit-for-20082010-ford-64l-powerstroke","title":"HIGH FLOW Up Pipe \u0026 Exhaust Manifold Kit For 2008–2010 Ford 6.4L Powerstroke","description":"\u003cp\u003eThis High Flow Up Pipe and Exhaust Manifold Kit replaces factory manifolds and up-pipes with durable cast manifolds and T304 stainless steel pipes, engineered specifically for 2008–2010 Ford 6.4L Powerstroke diesel engines. Factory up-pipes crack from constant heating and cooling, resulting in exhaust leaks, slower turbo spool, performance loss, extra noise, and soot buildup. This kit restores proper turbo performance while supporting better exhaust sealing and long-term reliability.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2008–2010 Ford F-250 Super Duty -- 6.4L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e2008–2010 Ford F-350 Super Duty -- 6.4L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e2008–2010 Ford F-450 Super Duty -- 6.4L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e2008–2010 Ford F-550 Super Duty -- 6.4L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUp-Pipe Material:\u003c\/strong\u003e Larger diameter 304 stainless steel up pipes with internally shielded stainless steel expansion bellows\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExhaust Manifold Construction:\u003c\/strong\u003e 0.25\" thick-walled Hi-Silicon ductile casting to combat cracking from high exhaust temperatures\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManifold Design:\u003c\/strong\u003e Heavy walled elbow connections prevent burning out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Performance:\u003c\/strong\u003e Holds in exhaust gas temperatures enhancing turbine pumping efficiency\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrosion Protection:\u003c\/strong\u003e Manifolds coated to resist corrosion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor-Ready:\u003c\/strong\u003e Pre-drilled for exhaust gas temperature and\/or pressure sensors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Exhaust manifold gaskets, turbocharger pipe gaskets, and A\/C offset adapter to eliminate damaging the A\/C hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is strongly recommended. Installation requires removal of inner fenders and turbo mounting hardware; expect significant labor time, particularly with factory equipment.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52916553548085,"sku":"FP-579-0810","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-579-0810-1.webp?v=1780531625"},{"product_id":"polished-ss304-5-exhaust-tail-pipe-for-11-23-67-ford-powerstroke","title":"Polished SS304 5\" Exhaust Tail Pipe For 11-23 6.7 Ford Powerstroke","description":"\u003cp\u003eThis Polished SS304 5\" Exhaust Tail Pipe is designed for 2011-2023 Ford 6.7L Powerstroke diesel trucks. Made from 304 stainless steel with a polished finish, it offers superior durability compared to 409 stainless, which corrodes quickly in harsh climates. The 5-inch diameter supports improved exhaust flow and delivers a clean polished appearance as a direct replacement for a worn factory tail pipe or part of a custom exhaust build.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2011-2023 Ford F-250 6.7L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e2011-2023 Ford F-350 6.7L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e2011-2023 Ford F-450 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 Stainless Steel with polished finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance:\u003c\/strong\u003e 304 stainless provides durability in northern climates and resists rust and corrosion better than 409 alternatives\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment Compatibility:\u003c\/strong\u003e Fits F-250, F-350, and F-450 Super Duty models across all body styles within the 2011-2023 model year range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is a direct bolt-on replacement tail pipe designed to mount to existing exhaust system hangers. Installation requires basic hand tools and can typically be completed at ground level without lift equipment, though professional installation is recommended for proper alignment and fitment confirmation.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52916556923189,"sku":"FP-158-T-1123","price":253.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-158-T-1123-1.webp?v=1780531694"}],"url":"https:\/\/www.performancepartsfactory.com\/collections\/exhaust-parts.oembed","provider":"Performance Parts Factory","version":"1.0","type":"link"}