{"title":"Intake Systems","description":"\u003cp\u003eCold air intakes, intercooler pipes, and high-flow intake manifolds for Ford, Dodge, and GM diesels.\u003c\/p\u003e\n\u003ch2\u003eStop Boost Leaks and Feed the Turbo\u003c\/h2\u003e\n\u003cp\u003eThe factory charge-air system leaks where you can't see it. Oil mist from the CCV system softens the rubber intercooler boots until they swell, slip off, or split under boost — and a boost leak means lost power, more smoke, higher EGTs, and turbo lag. Factory plastic intake tubes restrict airflow, and the cast intake manifold becomes a bottleneck under load. These aluminum and stainless intercooler pipes, cold air intakes, and high-flow manifolds seal the charge air and feed the turbo clean, cool air.\u003c\/p\u003e\n\u003ch3\u003eFits these trucks\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFord 6.7L Powerstroke — high-flow intake manifolds, cold-side intercooler pipes, air-to-water intercooler kit\u003c\/li\u003e\n  \u003cli\u003eFord 7.3L Powerstroke — stainless spider intake manifold, cold air intake, intercooler boot kit\u003c\/li\u003e\n  \u003cli\u003eDodge\/Ram 6.7L Cummins — cold air intake, intake elbow, grid-heater plenum plate, intake heater coil\u003c\/li\u003e\n  \u003cli\u003eCummins ISX15 \/ X15 — Big Boss intake manifold\u003c\/li\u003e\n  \u003cli\u003eGMC\/Chevy 6.6L Duramax (LB7–L5P) — intercooler \/ boost-tube upgrade pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do my intercooler boots and pipes leak?\u003c\/strong\u003e\u003cbr\u003eOil from the CCV system coats and softens the factory rubber boots. Add boost, towing heat, and a tune and they swell, slip off the flange, or split — you lose power and boost and see more smoke and higher EGTs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a cold air intake actually do?\u003c\/strong\u003e\u003cbr\u003eIt replaces restrictive plastic tubing with larger aluminum or stainless piping for better airflow and heat resistance, feeding the turbo cooler, cleaner air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a high-flow intake manifold worth it?\u003c\/strong\u003e\u003cbr\u003eIt smooths the flow path and moves more air with less turbulence, which helps EGTs under towing. The factory manifold is a known bottleneck when you ask the truck to work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the Cummins grid-heater plate and intake elbow for?\u003c\/strong\u003e\u003cbr\u003eThey clean up and strengthen the 6.7 Cummins intake — better flow and reliability at the intake horn\/plenum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my truck?\u003c\/strong\u003e\u003cbr\u003eMatch the year and engine on the product page to your truck. Get the right part the first time.\u003c\/p\u003e","products":[{"product_id":"cummins-intake-manifold-plenum-grid-heater-plate-dodge-ram-6-7l-diesel-2007-5-2024","title":"Cummins Intake Manifold Plenum Grid Heater Plate for Dodge Ram 6.7L Diesel (2007.5-2024)","description":"\u003cp\u003eThis intake manifold plenum grid heater plate is machined from aluminum and measures 1\/2\" thick, designed as a direct-fit replacement for the factory-style grid heater on 2008-2024 Dodge Ram with the 6.7L Cummins diesel engine. The factory grid heater sits directly in the intake plenum and acts as a massive restriction, and this machined plate allows a massive volume of cooler, denser air into the engine. Built for heavy-duty diesel use, this plate is designed for reliable sealing, long-term durability, and strength under demanding conditions in towing, hauling, daily driving, and performance-minded builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2007.5–2024 Dodge Ram 2500 — 6.7L Cummins Diesel\u003c\/li\u003e\n  \u003cli\u003e2007.5–2024 Dodge Ram 3500 — 6.7L Cummins Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1\/2\" thick, machined on the bottom side for maximum intake flow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntake Plenum Gasket Part Number:\u003c\/strong\u003e 3947530\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntake Horn Gasket Part Number:\u003c\/strong\u003e 4940849\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication Focus:\u003c\/strong\u003e Reduces airflow restriction in the intake path to support cleaner, more efficient engine operation. Compatible with all stock-style intake manifolds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is a straightforward bolt-on process that can be done with basic hand tools and typically takes 1 to 2 hours. Professional installation is recommended. The intake plate mounts up with the factory gasket, though IAT sensor wiring may require extension depending on your engine setup.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915651543349,"sku":"DR-26-0724","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-26-0724_-1.webp?v=1779775482"},{"product_id":"3-5-inch-intake-manifold-elbow-dodge-ram-2500-3500-6-7l-cummins-turbo-diesel-2007-2018","title":"3.5-Inch Intake Manifold Elbow for Dodge Ram 2500 3500 6.7L Cummins Turbo Diesel","description":"\u003cp\u003eThe 3.5-inch intake manifold elbow for 2007-2018 Dodge Ram 2500 and 3500 6.7L Cummins Turbo Diesel features a 3.50\" OD inlet and 3.00\" OD outlet, designed to reduce restriction compared with factory-style intake components. It smoothly transitions from a 3.5\" inlet to two 3\" mandrel bent tubes, improving airflow for working trucks, towing applications, and performance-focused diesel builds. This intake manifold elbow supports cleaner, more direct airflow while maintaining durability under demanding heavy-duty diesel conditions.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2007-2010 Dodge Ram 2500 – 6.7L Turbo Diesel\u003c\/li\u003e\n  \u003cli\u003e2007-2010 Dodge Ram 3500 – 6.7L Turbo Diesel\u003c\/li\u003e\n  \u003cli\u003e2010-2018 Ram 2500 – 6.7L Turbo Diesel\u003c\/li\u003e\n  \u003cli\u003e2011-2018 Ram 3500 – 6.7L Turbo Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInlet Diameter:\u003c\/strong\u003e 3.50\" OD (Outside Diameter)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutlet Diameter:\u003c\/strong\u003e 3.00\" OD (Outside Diameter)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube Design:\u003c\/strong\u003e 3.5\" inlet smoothly transitions to two 3\" mandrel bent tubes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel construction is highly durable and resistant to corrosion, withstanding harsh engine compartment conditions including heat, moisture, and chemicals\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e Fully TIG welded with precise settings to produce high-quality, strong welds with optimal penetration without impacting airflow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor Ports:\u003c\/strong\u003e 2 NPT (National Pipe Taper) ports\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Increase:\u003c\/strong\u003e 49.4% increase in flow over the factory manifold\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEGT Reduction:\u003c\/strong\u003e 50-200 degrees F drop in Exhaust Gas Temperatures (EGTs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFuel Economy:\u003c\/strong\u003e 0.5-1 MPG increase\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e 1 x NEW 3.5\" Intake Manifold with Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is highly recommended to ensure proper fitment and optimal performance. The intake manifold elbow requires deletion of factory emissions equipment as this manifold does not have provisions to use any of it. Verify your vehicle year, engine, and intake setup before purchase to ensure the correct fitment.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915651772725,"sku":"DR-126-0718","price":94.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-126-0718_-_1.webp?v=1779775867"},{"product_id":"x-flow-intake-heater-coil-for-2007-2025-dodge-ram-6-7l-cummins-diesel","title":"X-Flow Intake Heater Coil for 2007-2025 Dodge RAM 6.7L Cummins Diesel","description":"\u003cp\u003eThe X-Flow Intake Heater Coil for 2007–2025 Dodge RAM 6.7L Cummins replaces the factory intake heating grid which has 55% cross-sectional restriction, reducing to just 15% restriction with this coil heater—resulting in 89% less restricted airflow. This direct-fit heating element supports cold-start reliability for Cummins owners who have upgraded to X-Flow intake systems. It delivers warm air to the cylinders during ignition, helping ensure quick and clean starts in cold weather conditions.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2007–2025 Dodge RAM 2500\/3500 6.7L Cummins Diesel (ISB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Coil-style heater element designed to replace factory grid heater without airflow restriction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Heater for BD Intake Horns (p\/n 1041560 \/ 1041561 \/ 1041566) when installed with Intake Open Grid (p\/n 1041562 \/ 1041564)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAirflow Advantage:\u003c\/strong\u003e 74% larger than factory intake horn with open grid design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElectrical Connection:\u003c\/strong\u003e Integrates with the original grid heater wiring harness, restoring essential cold start function\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Crafted from high-quality materials featuring a raw metal finish that provides both durability and a rugged look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 36-month or 75,000-mile parts warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe kit installs in just 30 minutes using basic tools and is emissions-legal in all 50 states. These high-performance intake components eliminate the stock grid heater for improved airflow, and BD's solution is a bolt-on heater kit that integrates with the original grid heater wiring harness. Note: In some setups, tuning may be needed to prevent triggering code P2609.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915760660789,"sku":"DR-603-0725","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-603-0725-1.webp?v=1779816822"},{"product_id":"cold-air-intake-kit-w-filter-for-2007-5-2012-dodge-ram-3500-6-7l-cummins-blue","title":"Cold Air Intake Kit w\/Filter For 2007.5-2012 Dodge Ram 3500 6.7L Cummins-Blue","description":"\u003cp\u003eBuilt with a polished T-304 aluminum pipe and a high-flow reusable filter, this cold air intake kit for 2007.5–2012 Dodge Ram 3500 6.7L Cummins diesel is engineered to draw cooler, denser air into your engine. By delivering cooler, denser air into the combustion chamber, this intake system improves throttle response, increases horsepower, and enhances overall torque. The blue intake pipe delivers both performance and visual impact for your engine bay.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2007.5–2012 Dodge Ram 3500 — 6.7L Cummins Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntake Pipe Material:\u003c\/strong\u003e Polished T-304 aluminum with blue powder coat finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAir Filter:\u003c\/strong\u003e Washable and reusable cone air filter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance Gain:\u003c\/strong\u003e Increases 7-10% of Horsepower and 6-8% of Torque\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e CNC mandrel-bent piping ensures your engine gets the dense, cool air it needs and maintains consistent internal diameter throughout\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCold Air Relocation:\u003c\/strong\u003e A cold air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Bolt-on fit with all mounting accessories included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Direct fit for factory exhaust manifold; verify fitment if running aftermarket manifolds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eEasy to install and easy to fit with simple tools. No additional parts will be needed for installation after you purchase this kit. Professional installation is recommended for best fitment confirmation.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915761578293,"sku":"DR-190-7512","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-190-7512-1.webp?v=1779817375"},{"product_id":"high-flow-isx15-x15-big-boss-intake-manifold-for-2013-5-2024-cummins-engine","title":"HIGH FLOW ISX15 \u0026 X15 Big Boss Intake Manifold For 2013.5-2024 Cummins Engine","description":"\u003cp\u003eThis High Flow Big Boss Intake Manifold is designed for 2013.5–2024 Cummins ISX15 and X15 engines. The Big Boss intake manifold increases and balances the air going into the engine, with airflow increasing up to 35% leading to lower air intake temperatures and power gains of up to 20 hp. Built for demanding commercial diesel applications, this direct-fit manifold improves intake efficiency and supports reliable engine performance under heavy-duty load.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2013.5–2024 Cummins ISX15 \u0026amp; X15 Engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAirflow Increase:\u003c\/strong\u003e Up to 35% more airflow compared to stock intake manifold\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Gain:\u003c\/strong\u003e Up to 20 hp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntake Air Temperature:\u003c\/strong\u003e Cooler air intake temperatures\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Direct replacement manifold utilizing factory hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Opens up the manifold design by eliminating the factory \"necked down design\" and replacing it with an open design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 41.0 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e W36.0\" x H13.0\" x L10.0\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis direct replacement intake manifold is simple to install and utilizes factory hardware. No modifications to existing engine components are required for installation.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915761840437,"sku":"DR-AL-1324","price":494.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/DR-AL-1324-1fixed.webp?v=1779911336"},{"product_id":"3-polished-intercooler-pipe-boot-kit-for-1999-5-2003-ford-7-3l-powerstroke","title":"3\" Polished Intercooler Pipe Boot Kit For 1999.5-2003 Ford 7.3L Powerstroke","description":"\u003cp\u003eThis 3-inch intercooler pipe boot kit is designed for 1999.5–2003 Ford 7.3L Powerstroke diesel engines and features mandrel-bent polished stainless steel tubing. The bolt-on kit fits both OEM and aftermarket intercoolers and restores proper charge air flow when worn or leaking factory boots restrict performance. Mandrel-bent aluminum pipes replace the stock system for both the intercooler's hot and cold sides to maximize durability.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999.5–2003 Ford F-250 Super Duty — 7.3L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e1999.5–2003 Ford F-350 Super Duty — 7.3L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e1999.5–2003 Ford F-450 Super Duty — 7.3L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e1999.5–2003 Ford F-550 Super Duty — 7.3L Powerstroke\u003c\/li\u003e\n  \u003cli\u003e2000–2003 Ford Excursion — 7.3L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Material:\u003c\/strong\u003e Mandrel-bent polished stainless steel tubing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Includes 2 intercooler pipes and 4 silicone boots with constant-tension T-bolt clamps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBoot Type:\u003c\/strong\u003e Silicone boots with DuraCore technology\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished for engine bay appearance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Replaces factory piping and boots on both hot and cold sides of the intercooler system\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits both OEM and aftermarket intercoolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is strongly recommended. Installation may require silicone lubricant due to the beveled edge of the intercooler pipe.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915767050549,"sku":"FP-422-9903","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-422-9903-1.webp?v=1780531437"},{"product_id":"for-early-1999-ford-7-3l-powerstroke-diesel-stainless-intake-manifold-spyder-kit","title":"FOR Early 1999 Ford 7.3L Powerstroke Diesel Stainless Intake Manifold Spyder Kit","description":"\u003cp\u003eThis Stainless Intake Manifold Spyder Kit is built from stainless steel construction and designed for Early 1999 Ford 7.3L Powerstroke diesel engines. It replaces the factory intake spyder assembly to improve airflow distribution, reduce intake system restrictions, and support performance upgrades. This is a direct OEM replacement for early 99 7.3L F Series trucks.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999 Ford F-250, F-350 -- 7.3L Powerstroke Diesel (Early 1999 only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Replaces factory Y-pipe\/spyder assembly for direct airflow path from turbo to intake plenums\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor Provisions:\u003c\/strong\u003e Threaded ports for boost, map sensor, and air intake sensor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 1\/8\" NPT ports supplied with plugs for optional accessory installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Factory bolt-on attachment points maintained for proper fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis intake manifold spyder kit is a direct bolt-on replacement that secures to factory mounting points. Professional installation is recommended to ensure proper gasket sealing and turbo connection alignment.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915767345461,"sku":"FP-465-1999","price":174.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-465-1999-1.webp?v=1780531526"},{"product_id":"intake-manifold-upgrade-for-11-14-17-19-ford-6-7l-power-stroke-diesel","title":"Intake Manifold Upgrade For 11-14 \/ 17-19 Ford 6.7L Power Stroke Diesel","description":"\u003cp\u003eThis intake manifold upgrade for 2011–2014 and 2017–2019 Ford 6.7L Power Stroke delivers a cast, high-flow, two-piece manifold designed to replace weak plastic. This manifold is engineered to optimize airflow into the cylinders, reduce intake restrictions, and support higher performance levels in both stock and tuned diesel applications. Built for towing, work truck duty, and daily driving without requiring a tuning adjustment.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2011–2014 Ford F-250 \/ F-350 Super Duty 6.7L Power Stroke\u003c\/li\u003e\n  \u003cli\u003e2017–2019 Ford F-250 \/ F-350 Super Duty 6.7L Power Stroke\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Does NOT fit 2015\/2016 model year trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Cast design improves airflow and replaces weak plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e High-strength cast aluminum, built to handle extreme boost pressures and high temperatures\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Two-piece manifold\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTuning Required:\u003c\/strong\u003e No tuning required, direct OEM replacement\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEmissions:\u003c\/strong\u003e Compatible with factory emissions equipment and aftermarket air intake systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Addresses the common issues of cracking and leaking prevalent in factory plastic manifolds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e All mounting hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.0 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is a direct replacement using OEM bolt locations and ships with gaskets and hardware for a bolt-on swap. 2015–2016 kits include an external oil feed line in the package and require replacing the factory oil feed routing if applicable to your model year.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915770589493,"sku":"FP-479-1119","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-479-1119-1.webp?v=1780531646"},{"product_id":"motorsport-cold-side-intercooler-pipe-upgrade-kit-for-11-16-ford-powerstroke-6-7","title":"Motorsport Cold Side Intercooler Pipe Upgrade Kit For 11-16 Ford Powerstroke 6.7","description":"\u003cp\u003eThis Motorsport Cold Side Intercooler Pipe Upgrade Kit is a direct-fit replacement for the stock intercooler pipe on 2011-2016 Ford 6.7L Powerstroke diesel engines — no cutting or modification required. The mandrel-bent aluminum pipe features a 3.50\" diameter with polished finish for improved airflow and reduced restriction. The factory plastic charge pipe is prone to cracking and leaking under boost pressure, resulting in lost power and reliability issues. This upgraded kit is built for daily driving, towing, hauling, and performance diesel applications.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2011–2016 Ford F-250, F-350, F-450 — 6.7L Powerstroke Diesel (V8)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polished aluminum pipe with 3.50\" diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone Hose:\u003c\/strong\u003e 5-Ply Aramid Reinforced Silicone Hose — stronger than OEM hose and built to last\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamp System:\u003c\/strong\u003e Heavy duty spring loaded T-Bolt clamps with 3\/4\" wide stainless steel band and bridge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two piece pipe and silicone hose design for quick installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance Benefit:\u003c\/strong\u003e Eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis intercooler pipe kit is direct fit, retaining all factory emissions components and does not require the use of a tuner. Most installations can be completed at home with basic hand tools in under two hours, though professional installation is available at qualified diesel shops.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915771736373,"sku":"FP-303-1116","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-303-1116-1.webp?v=1780531665"},{"product_id":"bridge-cold-side-intercooler-pipe-for-2004-5-2005-gmc-chevy-6-6l-duramax-lly","title":"Bridge \u0026 Cold Side Intercooler Pipe For 2004.5-2005 GMC Chevy 6.6L Duramax LLY","description":"\u003cp\u003eThe Bridge and Cold Side Intercooler Pipe is a bolt-on upgrade for the 2004.5-2005 GM 6.6L Duramax LLY. This 3-inch mandrel-bent pipe flows 53% more air than the factory unit and directly improves charge air delivery from the intercooler to the intake, supporting stronger boost reliability and cleaner engine breathing. Designed to restore factory durability or enhance performance, this cold side pipe eliminates the restrictive factory design that can lead to boost loss and leaks under load.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2004.5–2005 Chevrolet Silverado 2500HD\/3500HD — 6.6L Duramax LLY\u003c\/li\u003e\n  \u003cli\u003e2004.5–2005 GMC Sierra 2500HD\/3500HD — 6.6L Duramax LLY\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 14-gauge aluminum mandrel-bent construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAir Flow Increase:\u003c\/strong\u003e 53% more air than factory intercooler pipe\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2.25-inch to 3-inch silicone boot and t-bolt clamps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBridge Compatibility:\u003c\/strong\u003e Designed to work with factory bridge on 2004.5–2005 LLY models\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e No tuning required, bolt-on installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 12 pounds; ships 24 inches long by 16 inches wide by 10 inches high\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstalls easily with basic hand tools. No additional modifications or upgrades needed to fit on stock trucks. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915773014325,"sku":"GM-352-4505","price":694.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/GM-352-4505-1.webp?v=1780531497"},{"product_id":"cold-side-intercooler-pipe-upgrade-for-2017-2019-chevy-gmc-6-6l-duramax-l5p","title":"Cold Side Intercooler Pipe Upgrade For 2017-2019 Chevy GMC 6.6L Duramax L5P","description":"\u003cp\u003eThis Cold Side Intercooler Pipe Upgrade is designed for 2017–2019 Chevy and GMC 6.6L Duramax L5P diesel engines and replaces the factory cold side charge pipe with a 3-inch diameter aluminum upgrade to help improve airflow and boost retention. The factory cold-side pipe for the L5P is 2.5 inches, which can cause boost loss, reduced throttle response, and poor drivability. This cold side intercooler pipe upgrade is ideal for daily driving, towing, hauling, and diesel performance use.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2017-2019 Chevrolet Silverado 2500\/3500 HD – 6.6L Duramax L5P\u003c\/li\u003e\n  \u003cli\u003e2017-2019 GMC Sierra 2500\/3500 HD – 6.6L Duramax L5P\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 3 inches throughout with smooth transitions to significantly increase airflow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece assembly for ease of install\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Fitting:\u003c\/strong\u003e CNC-machined quick-disconnect fitting with new o-ring and spring clip to ensure a secure and leak-free fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Constant-tension T-bolt clamps for accurate and consistent holding power\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone Boots:\u003c\/strong\u003e Included silicone boots with superior resistance to heat, pressure, fuel, and oil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor Bung:\u003c\/strong\u003e Retains the intake air temp harness mounting location for safe and secure wire routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis cold-side intercooler pipe is a direct bolt-on upgrade that fits the 2017-2019 L5P without modifications. No tuning required and will not trigger warning lights on factory systems.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915773243701,"sku":"GM-437-1719","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/GM-437-1719-1.webp?v=1780531500"},{"product_id":"intercooler-pipes-boost-tube-upgrade-kit-20-24-chevy-gmc-6-6l-duramax-diesel-l5p","title":"Intercooler Pipes Boost Tube Upgrade Kit 20-24 Chevy GMC 6.6L Duramax Diesel L5P","description":"\u003cp\u003eThis Intercooler Pipes Boost Tube Upgrade Kit replaces restrictive factory charge air piping with larger 3.5-inch diameter tubes for 2020–2024 Chevy Silverado and GMC Sierra 6.6L Duramax L5P diesel engines. Made of high-quality aluminized steel for maximum strength and durability, it improves airflow, boosts retention, and reduces the risk of leaks during towing, hauling, and demanding diesel use.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2020–2024 Chevrolet Silverado 2500 HD, 2500, 3500 -- 6.6L Duramax L5P\u003c\/li\u003e\n  \u003cli\u003e2020–2024 GMC Sierra 2500 HD, 2500, 3500 HD -- 6.6L Duramax L5P\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 3.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminized steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Mandrel-bent smooth bends and steel construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAirflow Improvement:\u003c\/strong\u003e 26–45% improvement in airflow over stock pipes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Connections:\u003c\/strong\u003e High-strength 5-ply silicone hoses\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCold-Side Adapters:\u003c\/strong\u003e Pair of billet aluminum cold-side adapters for intercooler connection and throttle body, specially designed for L5P airflow requirements with Venturi-like taper to maintain boost pressure and volumetric flow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplacement Parts:\u003c\/strong\u003e Replaces factory two-piece restrictive pipes with single-piece or optimized multi-piece design for maximum flow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHot and Cold Side:\u003c\/strong\u003e Full 3.5-inch diameter maintained on both hot and cold side\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance Benefit:\u003c\/strong\u003e Smooth bends support quicker turbo spool thanks to improved boost pressure retention for maximum horsepower\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBolt-on installation with no tuning required; fits on stock truck with no other modifications or upgrades necessary. Unplug ECU connectors above the lower intercooler input to provide working room; disconnect battery before unplugging ECU harness to avoid a check engine light.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915773964597,"sku":"GM-467-2024","price":314.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/GM-467-2024-1.webp?v=1780531659"},{"product_id":"high-flow-cold-air-intake-for-995-03-ford-73l-powerstroke","title":"High Flow Cold Air Intake For 99.5-03 Ford 7.3L Powerstroke","description":"\u003cp\u003eThis High Flow Cold Air Intake for 1999.5–2003 Ford 7.3L Powerstroke features precision CNC mandrel-bent aluminum tubing designed to improve airflow, turbo spool-up, and throttle response. Engineered for daily driving, towing, hauling, and racing, this intake delivers cleaner, less restrictive airflow compared to worn or restrictive factory components.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999.5–2003 Ford F-250 and F-350 Super Duty — 7.3L Powerstroke Diesel (late 1999 and newer; early 1999 models with different turbo inlet are not compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction Material:\u003c\/strong\u003e Precision CNC mandrel-bent aluminum tubing with durable, smooth intake design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAir Filter:\u003c\/strong\u003e High-flow reusable cotton media filter that is durable and eliminates the need for periodic replacement filters\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCouplers:\u003c\/strong\u003e Silicone couplers engineered to endure the high heat of diesel engine environments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAirflow Improvement:\u003c\/strong\u003e Cold air intake systems for 7.3L Powerstroke flow 53.66% better than stock intake\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e CNC mandrel-bent aluminum intake tube, reusable cotton media filter, installation hardware, and all necessary mounting components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis cold air intake bolts on in minutes and requires zero modification to your truck. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52915776946485,"sku":"FP-107-9903","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-107-9903-1.webp?v=1780531590"},{"product_id":"high-flow-intake-manifold-upgrade-for-2015-2016-ford-67l-powerstroke-diesel","title":"HIGH FLOW Intake Manifold Upgrade For 2015-2016 Ford 6.7L PowerStroke Diesel","description":"\u003cp\u003eFor 2015–2016 Ford 6.7L PowerStroke trucks, this high-flow intake manifold is a cast, two-piece direct replacement for the factory plastic manifold. The 2015\/2016 model year selection includes the necessary oil feed line required for these trucks. The improved flow design over factory manifolds reduces intake restriction and improves airflow distribution, supporting better engine breathing and turbo efficiency. Built for diesel performance and reliability, this upgrade is designed for owners looking to enhance intake system performance on daily-driven, towing, or modified 6.7L PowerStroke trucks.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2015–2016 Ford F-250 Super Duty 6.7L PowerStroke Diesel\u003c\/li\u003e\n  \u003cli\u003e2015–2016 Ford F-350 Super Duty 6.7L PowerStroke Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast, high-flow construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece manifold with optimized airflow passages\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Advantage:\u003c\/strong\u003e Zero modifications or tuning required; direct OEM replacement\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2015\/2016 Model Kit:\u003c\/strong\u003e Includes 2015-2016 turbo oil feed line and rubber boot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Addresses common issues of cracking and leaking prevalent in factory plastic manifolds by optimizing airflow to ensure peak engine efficiency\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any aftermarket air intake systems and factory emissions systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFor 2015\/2016 model year trucks, read all instructions carefully before installing; the factory turbo oil feed line must be replaced with the included oil feed line during installation. Professional installation is recommended to ensure proper torque specification and sealing.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52916555317557,"sku":"FP-479-1-1516","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-479-1-1516-1_2bd53712-b34a-4104-8cf2-2fc454f25da9.webp?v=1780531980"},{"product_id":"upgraded-air-to-water-intercooler-kit-fit-ford-67l-powerstroke-diesel-2011-2016","title":"Upgraded Air To Water Intercooler Kit Fit Ford 6.7L Powerstroke Diesel 2011-2016","description":"\u003cp\u003eThis Upgraded Air-To-Water Intercooler Kit is a direct fit for all 2011–2016 Ford 6.7L Powerstrokes and lowers charge air temperatures while improving airflow efficiency to support consistent engine performance under towing, hauling, and heavy-duty driving conditions. Built with cast aluminum end tanks that are precision TIG-welded to the robust bar-and-plate core, this kit is designed as a strong replacement or upgrade for worn, leaking, or inefficient factory intercooler components.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2011–2016 Ford Super Duty F-250, F-350, F-450, F-550 — 6.7L Powerstroke Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Design:\u003c\/strong\u003e Bar-and-plate aluminum construction with cast end tanks precision TIG-welded for strength and reliability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAirflow Performance:\u003c\/strong\u003e 22% greater airflow than stock 6.7L Powerstroke intercooler\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCooling Results:\u003c\/strong\u003e Dyno-proven 40 lb-ft torque gains without other modifications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Tank Construction:\u003c\/strong\u003e Cast end tanks reduce potential failure points compared to cut and welded tanks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntercooler Piping:\u003c\/strong\u003e Includes Mishimoto mandrel-bent aluminum intercooler pipes for greater durability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone Boots:\u003c\/strong\u003e Silicone Boots with DuraCore™ technology and Constant Tension Worm Gear Clamps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e No tune required—air-to-water intercooler can be installed on a completely stock or modified truck\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliability Benefit:\u003c\/strong\u003e Maintains stable performance under demanding diesel use by eliminating the internal leaking common to stock intercoolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis complete, bolt-on solution includes all required hardware for seamless installation and OEM-like fitment. Most installations can be completed by experienced technicians without engine modification or custom tuning.\u003c\/p\u003e\n\n\u003cp\u003eCheck local emissions regulations before purchase. Professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eGet the right part the first time.\u003c\/p\u003e","brand":"Performance Parts Factory","offers":[{"title":"Default Title","offer_id":52916556202293,"sku":"FP-500-1-1126","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5036\/3957\/files\/FP-500-1-1126.webp?v=1780531720"}],"url":"https:\/\/www.performancepartsfactory.com\/collections\/intake-systems.oembed","provider":"Performance Parts Factory","version":"1.0","type":"link"}